Millisecond Position View Modifier [Phyz]

[Vega]

Millisecond Position View Modifier [Phyz]

This code will modify the millisecond section of the timer to display your current position. Works everywhere except for battle.

NTSC-U
C27EA41C 00000003
881E0198 3D808053
3D6038A0 7D6B0214
916C10A0 00000000

PAL
C27F4A44 00000003
881E0198 3D808053
3D6038A0 7D6B0214
916C5BE8 00000000

NTSC-J
C27F40B0 00000003
881E0198 3D808053
3D6038A0 7D6B0214
916C5568 00000000

NTSC-K
C27E2E04 00000003
881E0198 3D808052
3D6038A0 7D6B0214
916C3C40 00000000

---

Source:
#Values per Region

.set region, '' #Must set region value, or else source will not compile

.if (region == 'E' || region == 'e') # RMCE
    .set _1sthalf, 0x8053
    .set _2ndhalf, 0x10A0
.elseif (region == 'P' || region == 'p') # RMCP
    .set _1sthalf, 0x8053
    .set _2ndhalf, 0x5BE8
.elseif (region == 'J' || region == 'j') # RMCJ
    .set _1sthalf, 0x8053
    .set _2ndhalf, 0x5568
.elseif (region == 'K' || region == 'k') # RMCK
    .set _1sthalf, 0x8052
    .set _2ndhalf, 0x3C40
.else # Invalid Region
    .abort
.endif

lbz r0, 0x0198 (r30) #Default Instruction; r0 now holds position value

lis r12, _1sthalf
lis r11, 0x38A0
add r11, r11, r0 #Can't do addis w/o lis due to r0 being source register
stw r11, _2ndhalf (r12)

---

Code Creator: Phyz
Code Contributors: Vega (Helped shortened the length of the original Source); Bully (Millisecond Display Modifier Code creator), mdmwii (subroutine founder for Millisecond Display