Start with Items [CLF78, Fynn935083]

[Vega]

Thank you. NTSC-U now works, but J and K are freezing at countdown. So only thing left is the in-source addresses for J and K have bad ports which will be slightly tedious to port. I would port these myself but I'm very lazy and got to go out of town due to work yet again on Monday

EDIT:

Had some free time and finished all the in-source address porting. Port command on wstrt is awesome!

For anyone who cares here's compile-able source:

Code:

#Code created by CLF78 & Fynn935083

#address ports
#80531134 = NTSC-U
#80535C7C = PAL
#805355FC = NTSC-J
#80523CD4 = NTSC-K

.set region, 'e' #fill in e p j or k

.if (region == 'E' || region == 'e') # RMCE
.set addr1, 0x809BF0B1
.set addr2, 0x809BD918
.set addr3, 0x809B8F68
.set addr4, 0x809BEE20
.elseif (region == 'P' || region == 'p') # RMCP
.set addr1, 0x809C38B9
.set addr2, 0x809C20D8
.set addr3, 0x809BD728
.set addr4, 0x809C3618
.elseif (region == 'J' || region == 'j') # RMCJ
.set addr1, 0x809C2919
.set addr2, 0x809C1138
.set addr3, 0x809BC788
.set addr4, 0x809C2678
.elseif (region == 'K' || region == 'k') # RMCK
.set addr1, 0x809B13F9
.set addr2, 0x809B0718
.set addr3, 0x809ABD68
.set addr4, 0x809B1C58
.else # Invalid Region
.err
.endif

stw r0,72(r29)
cmpwi r3,0
bne+ 0x006C
lis r3, addr1@ha
lbz r3, addr1@l (r3)
cmpwi r3,1
bne- 0x002C
lis r3, addr2@ha
lwz r3, addr2@l (r3)
addi r4,r3,56
lwz r3,0x291C(r3)
mulli r3,r3,88
add r3,r4,r3
lbz r4,33(r3)
lbz r5,34(r3)
cmpw r4,r5
bne+ 0x0034
lis r3, addr3@ha
lwz r3, addr3@l (r3)
lbz r3,0x0B84(r3)
mulli r3,r3,584
lis r4, addr4@ha
lwz r4, addr4@l (r4)
lwz r4,20(r4)
add r3,r3,r4
li r4, 6 #Set to bob-omb just for compilation purposes
stw r4,140(r3)
li r4,1
stw r4,144(r3)