+- Mario Kart Wii Gecko Codes, Cheats, & Hacks (https://mariokartwii.com)
+-- Forum: Cheat Codes (https://mariokartwii.com/forumdisplay.php?fid=51)
+--- Forum: Online Non-Item (https://mariokartwii.com/forumdisplay.php?fid=52)
+--- Thread: Clear Non-Wiimmfi Profile ID [Wiimm] (/showthread.php?tid=794)
Clear Non-Wiimmfi Profile ID [Wiimm] - Vega - 07-20-2018
Clear Non-Wiimmfi Profile ID [Wiimm]
This code allows you to clear the profile ID of desired license(s). It only works for licenses with FC's that are NOT made on Wiimmfi server.
At the License Selection screen. Press and HOLD your activator (ZZZZ value). While holding your activator, move to the license (using your D-Pad) that you want to clear the PID. Each Dpad value is designated for each specific licenese.
Dpad License Values:
Up = Top Right
Down = Bottom Left
Left = Top Left
Right = Bottom Right
NOTES: If you are using your Wii Remote (no classic nor chuck attached), hold the Wii Remote counter-clockwise when using the D-Pad!! Simply hold the Wii Remote as if you were playing with the Wii Wheel.
If you are using the GCN, the Dpad values work when you hold the Controller counter-clockwise 45 degrees!! So the Up Button is actually the Left Button, Right button would be the Up button, etc etc. This rule probably also applies when using Chuck or Classic but I haven't tested it.
Once you press a desired Dpad button while holding your activator, you should now hear the game play music in double-speed for 2 seconds. Now enter into the specific license's settings, then exit back. Specific license will now have no FC, profile ID is successfully cleared. Change Mii's on a license, or log in a race/TT to save changes.
NTSC-U
C0000000 0000001C
3821FFD0 7FC802A6
BE810000 48000009
00000000 7E8802A6
3EA08034 82D40000
A2F5XXXX 3B00ZZZZ
7EF9C038 7C19C000
40A20078 3FA0809C
83BD8F88 3F409000
7C1DD000 41800064
3F400000 635A8FF8
72F80008 40820030
3F600000 637B93F0
7F5ADA14 72F80002
4082001C 7F5ADA14
72F80001 40820010
72F80004 41A2002C
7F5ADA14 7F5AEA14
3F001DCD 63186500
833A0014 7C19C000
40800010 3B200000
933A0014 3AC00078
2F960001 41BC001C
3AD6FFFF 3F203F80
419E0008 3F204000
3F40808A 933AC9D0
92D40000 BA810000
7FC803A6 38210030
4E800020 00000000
PAL
C0000000 0000001C
3821FFD0 7FC802A6
BE810000 48000009
00000000 7E8802A6
3EA0rrrr 82D40000
A2F5XXXX 3B00ZZZZ
7EF9C038 7C19C000
40A20078 3FA0809C
83BDD748 3F409000
7C1DD000 41800064
3F400000 635A8FF8
72F80008 40820030
3F600000 637B93F0
7F5ADA14 72F80002
4082001C 7F5ADA14
72F80001 40820010
72F80004 41A2002C
7F5ADA14 7F5AEA14
3F001DCD 63186500
833A0014 7C19C000
40800010 3B200000
933A0014 3AC00078
2F960001 41BC001C
3AD6FFFF 3F203F80
419E0008 3F204000
3F40808A 933A10D8
92D40000 BA810000
7FC803A6 38210030
4E800020 00000000
NTSC-J
C0000000 0000001C
3821FFD0 7FC802A6
BE810000 48000009
00000000 7E8802A6
3EA08034 82D40000
A2F5XXXX 3B00ZZZZ
7EF9C038 7C19C000
40A20078 3FA0809C
83BDC7A8 3F409000
7C1DD000 41800064
3F400000 635A8FF8
72F80008 40820030
3F600000 637B93F0
7F5ADA14 72F80002
4082001C 7F5ADA14
72F80001 40820010
72F80004 41A2002C
7F5ADA14 7F5AEA14
3F001DCD 63186500
833A0014 7C19C000
40800010 3B200000
933A0014 3AC00078
2F960001 41BC001C
3AD6FFFF 3F203F80
419E0008 3F204000
3F40808A 933A0238
92D40000 BA810000
7FC803A6 38210030
4E800020 00000000
NTSC-K
C0000000 0000001C
3821FFD0 7FC802A6
BE810000 48000009
00000000 7E8802A6
3EA08033 82D40000
A2F5XXXX 3B00ZZZZ
7EF9C038 7C19C000
40A20078 3FA0809B
83BDBD88 3F409000
7C1DD000 41800064
3F400000 635A8FF8
72F80008 40820030
3F600000 637B93F0
7F5ADA14 72F80002
4082001C 7F5ADA14
72F80001 40820010
72F80004 41A2002C
7F5ADA14 7F5AEA14
3F001DCD 63186500
833A0014 7C19C000
40800010 3B200000
933A0014 3AC00078
2F960001 41BC001C
3AD6FFFF 3F203F80
419E0008 3F204000
3F408089 933AF538
92D40000 BA810000
7FC803A6 38210030
4E800020 00000000
rrrr Values (for PAL code only):
8034 = Wheel, Chuck, or Classic
8035 = GCN
XXXX values are standard Controller Address values
ZZZZ values are standard Button values
Code created by: Wiimm
RE: Clear Non-Wiimmfi Profile ID (Wii Remote only) - Vega - 07-20-2018
Please note tthat I couldn't clear the PID of the bottom right license when moving down from the top right license (I even made sure to use the original ZZZZ button config of the code from the wiki tockdom, + & - buttons combined). PID was made on mkwii.org. All other direction combinations appear to be find. I have no clue why that happened, may be a bug in the code?
RE: Clear Non-Wiimmfi Profile ID (Wii Remote only) - Leseratte10 - 07-22-2018
Did your bottom right license have a non-Wiimmfi friend code? Removing friend codes assigned by Wiimmfi is not supported by this code (because we don't want people to make new friend codes to un-ban or to farm for "nice" friend codes). If you tested this with a friend code actually assigned by Nintendo, please tell me again and I'll look at the code again or tell Wiimm.
RE: Clear Non-Wiimmfi Profile ID (Wii Remote only) - Vega - 07-23-2018
The bottom right license was an FC made on the mkwii.org mkw server (exact same python code as ALTWFC)
RE: Clear Non-Wiimmfi Profile ID (Wii Remote only) - Leseratte10 - 07-23-2018
I noticed a small error in your description of the code: You don't "move" to the license you want to clear the friend code of. Each direction of the D-Pad is assigned to one license. Whether you are on the top left license and press "right", or on the bottom left license and press "right", it would in both cases clear the same license. The bottom right license would be the "down" button (which is the "right" button when you hold the wiimote sideways - so, the button nearest to the A button). Maybe that was the issue with the bottom right license.
RE: Clear Non-Wiimmfi Profile ID (Wii Remote only) - Vega - 07-23-2018
Yup, my mistake. Thank you for clarifying.
RE: Clear Non-Wiimmfi Profile ID (Wii Remote only) - Vega - 07-23-2018
Also, do you remember the rest of the dpad license values?
EDIT:
Nevermind, simply reran the code with new FCs.
Up = Top Right License
Down = Bottom Left License
Left = Top Left License
Right = Bottom Right License
Whoever has editing privileges on the wiki.tockdom page should probably add those button license values on both the Clear Profile ID page and License Unlock page. Also GCN works on the code too, but you have to hold the GCN counter clockwise 45 degrees for the dpad values to be correct. PAL code varies when using GCN or not using GCN (see rrrr values)