Inaccurate Ki Blasts [Vega]

Ki Blasts rarely hit the opponent. There are two configurations to the code. 1st config effects both 1P and 2P/COM. 2nd config allows you to choose if the code effects 1P only or 2P/COM only, via the X value.

X values (2nd config only)
0 = 1P
1 = 2P/COM

NTSC-U Rev1 (1st config)
04061824 60000000

NTSC-U Rev1 (2nd config)
C206181C 00000004
2C1E000X 40820014
3C608006 60631828
7C6803A6 4E800020
38610050 00000000

Code creator: Vega

=====

1st config source:

At address 0x80061824 is a function call to 0x8000915C. That function call does some basic math which will give the Ki Blast's path a curved angle to stay on target. By nopping the function call, Ki Blast paths are now linear (straight line) and end up being inaccurate.

=====

2nd Config source:

#START ASSEMBLY

#Address
#NTSC-U = 8006181C

#r3 safe for use if used before original instruction, and safe if slot is a match since function call won't be taken

#Check slot (r30; 0 = 1P while 1 = 2P/COM)
cmpwi r30, 0 #1P used for compilation, adjust accordingly to what you want
bne- original_instruction

#Slot is a match skip over instruction (function call) at 0x80061824. Math used to make Ki Blasts' paths curve is disabled so they only travel via a linear path thus making them inaccurate
lis r3, 0x8006
ori r3, r3, 0x1828
mtlr r3
blr

#Original Instruction
original_instruction:
addi r3, sp, 80

#END ASSEMBLY